|
Home Improvement InformationGet New Floors And Save A Bundle Once
You Do It Yourself
by:
Lee Dobbins
Everybody loves the look of wood
floors, but if you have an older home, your floors are probably scuffed, scraped and dingy. Most homes ready-made before 1970 had wood
floors and even as although your home now has carpet there may be a beautiful wood
floor concealment under your rug!
After years of use, your floor wish need to be refinished and that can cost over $1000 for just one room! But if you want to put in a little time and elbow grease, you can coat the floor yourself and have the beautiful look of warm wood in your home for a fraction of the cost.
Contrary to what you may have heard, the finish doesn’t take weeks to dry. It’s quite simple actually. You can get the supplies for sanding at your neighborhood home improvement store. You’ll need a drum drum sander and a belt sander. They wish be able to advise you on the sandpaper you need, how to use the machine and what kind of stain and finish you’ll need to finish off the floor. Sanding creates fine particles of dust that wish get everyplace and on everything so you may want to pick up several dust masks and drop cloths piece you are at it.
The 1st thing you’ll want to do once
refinishing your floor yourself is to discover how to run the sander. The key to denudation a floor is learning how to get the drum sander working smoothly. The sanders are really easy to use. But they’re a bit on the loud side. The key is to support it moving at all times. The drum sander gets really hot and if you finish in one spot for any length of time, you run the risk of burning or denting your floor.
Running the drum sander is the fun part of refinishing, but you must be cautious as the machine is self propelled. You may feel like a Machine
driver smoothing ice after you get the hang of it! Once
you start it up, hold on firmly and do sure you support it in control at all times.
After the old finish is removed, you need to apply the stain and new finish. Think of this as the same as doing your nails – 1st you move out the old finish, then basecoat, color and topcoat. Sometimes you don’t want color on your nails so you skip that part. In your floor you mightiness besides skip that part (the stain) but you still want to use a finish to protect the floor.
When it comes to the finish you have 2 choices – oil based or water based. Oil-based is accessible in a satin, semi-gloss or gloss finish. Fabric works well on a wood
floor because it wish bring out the natural glow of the wood without too more of a shine as well as help hide any flaws. Oil-based besides produces a warm amber look that gives you the traditional glow of wood floors. Water-based ployurethan dries clean and resists yellowing. Water-based besides dries quicker.
Either way, do sure you let each coat dry thoroughly before applying the next. Follow the manufacturers manual on the product for drying times. Give your floor at least 24-36 hours before moving piece of furniture back on it. It wish continue to harden in the 1st couple of weeks.
Refinishing your floor is just a set of tasks which can be done easily if you take them one step of a time. Your flooring can get a whole new look for less once
you coat it yourself – you’ll save over 80 percentage of the cost.
Just about the author:
Lee Dobbins is a conducive writer for home improvement resources such as http://www.refinishing-hardwood-floors.comVisit our site and see how you can coat your wood
floor: http://www.refinishing-hardwood-floors.com/Do-It-Yourself-Hardwood-Floor-Refinishing.html
Circulated by Article Emporium
| |
