Molding Animal skin Armor

In order to mould animal skin armor, soak it in water until it becomes pliable and soft. Then place it in the mould until it dries and hardens.

Cuir Bouilli

The application of heat wish do the animal skin harder. If you were production a cover for a shield, for example, or else pieces of animal skin amour, the animal skin would-be be swaybacked quickly in boiling water before being moulded. This is called ‘cuir bouilli’, a process employed in production animal skin armor.

Victimisation vegetable brunet animal skin with at least a weight of 8 ounces, soak the piece in cold water. This wish ensure a uniform absorption once the animal skin armor is placed in the boiling water. Heat a pot of water to 180 degrees Fahrenheit, then immerse the wet animal skin for close to thirty seconds to a minute, until it darkens and begins to curl.

Move out the animal skin from the water and stretch it about the mould you have prepared, tacking it in place. Allow for shrinkage if you are cutting the animal skin armor from a pattern. Of course you can water-harden a larger piece of leather, flatten it under a cutting board, and then cut out the individual pieces of animal skin armor you want, and then mould them to the desired shape. At this stage it wish be really stretchy.

The boiling process does the animal skin armor thicker and harder, with a degree of shrinkage dependent upon the animal skin itself and the figure of immersion time. The longer it remains in the water, the much pronounced the effects.

A twenty second immersion can result in a shrinkage of 7/8s, with a thickening of 25%, spell a forty second immersion results in a 2/3rds shrinkage and a doubling of the thickness. As in any aspect of animal skin working, it is better to experiment with scrap pieces of animal skin 1st to get the effect you want.

Types of Moulds / Single Mould

Moulds can consist of one or much pieces. Folding the animal skin about the actual object for which a cover is being made, wherever the mould is the object, is an option once production a case for a gun, an arm guard in archery, a parcel for a knife or eye-caps for binoculars. Use tacks to hold it in place spell it dries.

A Two-piece Mould

A two-piece mould acts like two slices of bread, with the animal skin being the sandwich filling. In this way, animal skin armor shields were made. The animal skin armor is left in the mould until it dries.

A Three-piece Mould

A three-piece mould allows the production of items like bags and lens system cases without victimisation a gusset. The animal skin is stitched on three sides. Two pieces of the mould are inserted on either side of the interior of the wet leather, and then a wedge is driven between the middle. The forms are left until the animal skin is dried.

Tools to Use

* Wooden mould * Brass or steel tacks

Summary

* Do a mould to form the animal skin to the desired shape * Wet the animal skin * One piece mould: fit the wet animal skin armor over the mould * Two piece mould: sandwich the animal skin between the mould * Three piece mould: fit the pieces inside the animal skin * Leave the animal skin armor to dry before removing

Just about The Author:

Hey! Want To Cognize Much Just about Animal skin Craft? Here's How to Get Your Answers Quick and Easy Click Here ==> http://www.leathersecrets.com