|
Broadband Cyberspace InformationHow To Install Cable,Dls,And Dialup Modems Fast
by:
Otis F. Cooper
Once
you want to access the Internet,you want to
have the quickest
Electronic instrumentation
connection possible.And
the dialup electronic equipment
wish do if you want just email
basic surfing.
The quicker
cable or dsl are a must have for such
internet downloads of large files,super quicker
web
page access,and viewing videos online.
Installing your new modem,whether its dialup,dsl,
or cable,it can be a breeze once
you some
make
the installation an education experience as well
as having fun in the process.
For this to happen,you must be prepared with the
right equipment.This article has links to videos
and photos to help do just that.High speed modems
will need an lan
card in most cases,for example.
Let's take a deep down look at what it wish take to
get a new Internal or External electronic equipment
up and
running in your computer.
While we're at it,we wish see what it takes to install
a cable or dsl electronic equipment
as well.These modems are
always external but wish need a couple for parts in
order to get that fast cyberspace speed.
CONNECT THE Electronic instrumentation
TO THE COMPUTER
When beginning your Modem,first right down the
serial number for use should you need to contact
technical support.
External modems are connected to the computer
with the RS232 cable.This cable is connected to
the rear of the system at the serial port and the
modem itself.Some modems wish have this cable
as a part of the modem.
Internal modems are inserted in an expansion
slot on the motherboard,unless its intergrated
with the motherboard.
Provide power to the external electronic equipment
with the use
of the adapter that with the modem.Internal modems
get their power from the expansion slot right on the
motherboard.
After the electronic equipment
has been installed,both the external
and internal electronic equipment
must be connected to the analog
phone line.Plug one end of the phone cord to the jack
labeled Line on the electronic equipment
and the different into the
phone jack.You can then connect your telephone to
the phone jack on the modem.
INSTALL Electronic instrumentation
SOFTWARE
Now you can replace the system unit cover if you
are beginning an internal modem.And after all
peripherals are re-connected to the computer,
boot the computer.
With external modems,simply turn the computer
and electronic equipment
on.See if the power indicator is on.
If you have Windows 98 installed,insert the floppy
disk or cdrom containing the device driver into
the appropriate driving once
the "add new hardware"
screen appears.Follow the instructions on the disk
to install the device driver.
Be sure to see the electronic equipment
install instructions carefully
to be sure all installation procedures were followed.
Click on fininsh once Windows find and install the
device driver.
Users of Windows XP have an updated list of device
drivers which may be present.Its better to use the disk
when beginning the software.
TEST YOUR NEW MODEM
The device driver allow your electronic equipment
to talk to your
computer.To see if the electronic equipment
is working,click on
Start,Settings,Control Panel,and click the Modems
icon.
Read the description of the electronic equipment
to be sure it
is the one you have.
Windows XP users should click on Start,Control
Panel,and click the Phone and Modems icon.
Then click Modem,Properties,and Diagnostics.
Run a Query Electronic instrumentation
check to verify your modem
is up and running.
INSTALLING A CABLE OR DSL MODEM
Cable Modems are external and are connected to
the computer by a Cat5 Cable.This cables looks
like a regular electronic equipment
data cable but is larger.
One end of the Cat5 Cable is inserted into the
rear of the cable electronic equipment
patch the different end is
inserted into a Network Interface Card.
This NIC card must be installed in an empty adapter
slot in the system unit and remove data between
the computer and modem.
With the Cat5 cable connecting the electronic equipment
and PC
together,you must provide the Cyberspace signal to the
modem by connecting a coail cable to the modem.
This cable provides high speed cyberspace access and
may use the same connection as your television.
One end of the concentric cable connects to the modem
and the different is connected the cable TV connector.
If the connection is being used by the TV,a cable
adapter wish split the signals and you can use one
connector for some
your TV and the Internet.
DSL Modems as well use the NIC card and Cat5 cable.
Some DSL electronic equipment
require device drivers and either
a cdrom or disc should move with the modem.
Once you connect to the Cyberspace with a cable or dsl
modem,you'll most likely ne'er
go back to the slower
dialup version.
Onthe different hand,you just may want to keep your dialup
modem once you realize just how more much you're
going to invest once
it comes to broadband Internet.
Since the select is yours,learn all you can just about all
modems,how they work,and how they connect to the
world wide web.Your cyberspace experience wish grow
by leaps and bounds if you do.
Just just about the Author
Otis F. Cooper is alone dedicated to boosting the
knowledge and confidence of every computer user
that is serious just about knowing computers.Use his
informative articles and videos to understand every
aspect just about the PC. See more just about his formula
for pc training at http://www.ultimatepcrepair.com
| |
